Hello Guest it is December 11, 2019, 09:42:39 AM

Author Topic: MANURHIN LATHE AUTOMATICE  (Read 6503 times)

0 Members and 1 Guest are viewing this topic.

MANURHIN LATHE AUTOMATICE
« on: January 06, 2007, 10:24:38 AM »
Hi to all....y have a LAthe MANURHIN....maschine is work fine in manual mode but y don t have a post procesor for this maschine ,the control is SINUMERIK 5T CNC...is there some way to replace this control SINUMERIK and add MACH software or somthing else...pozdrav svima  8) 8) 8)
Re: MANURHIN LATHE AUTOMATICE
« Reply #1 on: January 06, 2007, 06:22:50 PM »
Is there a link where we can see the specs of the machine that you ere talking about?
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: MANURHIN LATHE AUTOMATICE
« Reply #2 on: January 07, 2007, 09:18:57 AM »
I don t know ....y search but no results on any search page.....y have some document abouth mascine-is s all on german,i think that is made in France...
[img=http://img412.imageshack.us/img412/4213/masina1dp6.th.jpg]
[img=http://img402.imageshack.us/img402/4589/mas2yv0.th.jpg]
[img=http://img527.imageshack.us/img527/3258/mas3zl2.th.jpg]
This is some abouth this maschine
« Last Edit: January 07, 2007, 09:22:16 AM by AcieraF55 »
Re: MANURHIN LATHE AUTOMATICE
« Reply #3 on: January 07, 2007, 11:21:33 AM »
Is the late running stepper motors? If it is you could take all the old stuff off and put on new Drives :) I think this is about all you can do with this.. I don't know that machine at all.
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: MANURHIN LATHE AUTOMATICE
« Reply #4 on: January 07, 2007, 12:53:44 PM »
Hmm...Y must ask my dad xexe....but y think that moving foward and back on x,z ose using encder ....dammm y can t do enything abouth this maschine

Hood

*
Re: MANURHIN LATHE AUTOMATICE
« Reply #5 on: January 07, 2007, 01:24:43 PM »
Can you take some pictures of the lathe, the motors and inside the control cabinet. This may let us see what you have and might be able to advise you.
Hood

Hood

*
Re: MANURHIN LATHE AUTOMATICE
« Reply #6 on: January 07, 2007, 01:27:25 PM »
Re: MANURHIN LATHE AUTOMATICE
« Reply #7 on: January 07, 2007, 05:49:12 PM »
For the benefit of people who don`t recognise the name,Manurhin make some very nice machines.Mainly fixed and sliding head cnc lathes.As this has a 5T control it must be from the late 70`s early 80`s.They are French btw.
Unfortunately a Fanuc 5T must be one of the worst controls out there from an operator/programmers point.No screen only a single line display.It would retrofit keeping the original drives and some sort of interface between Mach and said drives as they will be analogue brushed dc servos.
Can the op tell us if it is fixed or sliding head?
Mark.

Offline Graham Waterworth

*
  • *
  •  1,921 1,921
  • Yorkshire Dales, England
    • View Profile
Re: MANURHIN LATHE AUTOMATICE
« Reply #8 on: January 07, 2007, 05:59:20 PM »
I bought a new Manurhin a few years ago, it was the biggest pile of crap I ever had the misfortune to own, I cost me a mint in lost orders, I ended up sending it back to France as they never got it to run for more than 2 hours a day.  The final straw was when the motor mounting broke in two and the spindle motor crashed through the side of the machine. It took me 2 years to get my money back.

Graham.
Without engineers the world stops
Re: MANURHIN LATHE AUTOMATICE
« Reply #9 on: January 08, 2007, 07:24:49 AM »
Thanks people you are get picture s on few hours please whait people just to see some of this....