Hello Guest it is March 28, 2024, 02:24:50 PM

Author Topic: Nodes  (Read 2300 times)

0 Members and 1 Guest are viewing this topic.

Nodes
« on: April 04, 2012, 04:19:39 PM »
Hey all,
When I bring art in (from illustrator and others), there seems to be way to many nodes. I have used Vectric and Lazycam and get the same results. I cut very simple shapes and do not undertand why there are so many nodes? It creates tons of gcode.
Thoughts and thanks,
Jeff

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Nodes
« Reply #1 on: April 04, 2012, 04:46:00 PM »
Jeff,
LC manual only covers the importation of dxf files. Your on your owne for anythhng else unless someone has fooled with it.
A umber of folks use Vectric and probably help you with that software.
RICH

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Nodes
« Reply #2 on: April 04, 2012, 05:13:41 PM »
SIMPLE reduce the total number of NODES before you export it to a dxf. All the drawing Programs seem to have that funtion.

(;-) TP