Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Farmerjeff on April 04, 2012, 04:19:39 PM

Title: Nodes
Post by: Farmerjeff on April 04, 2012, 04:19:39 PM

Hey all,
When I bring art in (from illustrator and others), there seems to be way to many nodes. I have used Vectric and Lazycam and get the same results. I cut very simple shapes and do not undertand why there are so many nodes? It creates tons of gcode.
Thoughts and thanks,
Jeff

Title: Re: Nodes
Post by: RICH on April 04, 2012, 04:46:00 PM

Jeff,
LC manual only covers the importation of dxf files. Your on your owne for anythhng else unless someone has fooled with it.
A umber of folks use Vectric and probably help you with that software.
RICH

Title: Re: Nodes
Post by: BR549 on April 04, 2012, 05:13:41 PM

SIMPLE reduce the total number of NODES before you export it to a dxf. All the drawing Programs seem to have that funtion.

(;-) TP