Hello Guest it is January 19, 2022, 05:12:12 AM

Author Topic: Circles in my Mach  (Read 1634 times)

0 Members and 1 Guest are viewing this topic.

Circles in my Mach
« on: March 13, 2012, 05:32:51 PM »
I am using Vectric and have Mach 2/3 arc txt* set as the post processor. When I upload an image into Mach, I am getting cirles (purple). The toolpath wants wants to follow these circles. It is not showing up on the Vectric (CAM). Once again as many before, thank you.
Re: Circles in my Mach
« Reply #1 on: March 13, 2012, 05:44:20 PM »
Hi Jeff,
  Check to see that Mach is in G91.1 Inc. I J mode in gen. Config.