Hello Guest it is March 29, 2024, 05:37:06 AM

Author Topic: Automation Direct  (Read 4963 times)

0 Members and 1 Guest are viewing this topic.

Automation Direct
« on: January 02, 2007, 08:34:47 PM »
What do you guys think of their pricing on their stepper parts? I thought they were pretty decent and looks like should work pretty good. Any feed back apreciated, and yes im new here!

http://web2.automationdirect.com/adc/Search/Search?searchquery=stepper&cmd=Search&fctype=adc.falcon.search.SearchFormCtrl&TxnNumber=-1

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Automation Direct
« Reply #1 on: January 02, 2007, 09:02:47 PM »
I have sent you a PM.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Automation Direct
« Reply #2 on: January 02, 2007, 09:14:01 PM »
For a begginer Geckos are your best bet.  They will even replace one drive if you fry it.  And they handle some seriuos beatting.
http://www.geckodrive.com/
Re: Automation Direct
« Reply #3 on: January 02, 2007, 11:05:59 PM »
I have used the AD motors and cables with Gecko drives in the past :)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Automation Direct
« Reply #4 on: January 03, 2007, 12:05:59 AM »
For a begginer Geckos are your best bet. They will even replace one drive if you fry it. And they handle some seriuos beatting.
http://www.geckodrive.com/

Actually there is where my first experience with motion control came, worked on a Practical Cnc table, which the gecko drive failed on, and no they did not replace it for free. Very good people to deal with though and very helpful.
Re: Automation Direct
« Reply #5 on: January 03, 2007, 10:16:59 AM »
At 114 it is just about free :) in the past I have used drives that cost me  10X  Not a bad deal!
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Automation Direct
« Reply #6 on: January 03, 2007, 03:21:16 PM »
At 114 it is just about free :) in the past I have used drives that cost me 10X Not a bad deal!

Never meant to say it was a bad price, theyre prices are extremly good. And i most likely wil end up going with them. Their G203V drives seem quite nice, i might get those.