Hello Guest it is November 20, 2019, 06:30:03 AM

Author Topic: Please help me  (Read 1299 times)

0 Members and 1 Guest are viewing this topic.

Please help me
« on: March 06, 2012, 05:59:09 AM »
Dear
I have small mashine with mach3 ,and this maschine milling the wood.Maschine milling the wood 2 monath ok,and now i have proble.when mascine milling wood one time a dont have good line,i have one line 0.1 mm ticknes,on one time
in all picture,and a have a quastion how to is ponit to ponit for milling the wood.

Please help me about problem with stripe in picture.

My knife is 0.3mm and step power is 0.12mm

best regards

Offline Tweakie.CNC

*
  • *
  •  8,005 8,005
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Please help me
« Reply #1 on: March 08, 2012, 07:36:45 AM »
Hi jurbanek,

It would help if you could perhaps post a picture showing the stripe problem you are having.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.