Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: jurbanek on March 06, 2012, 05:59:09 AM

Title: Please help me
Post by: jurbanek on March 06, 2012, 05:59:09 AM

Dear
I have small mashine with mach3 ,and this maschine milling the wood.Maschine milling the wood 2 monath ok,and now i have proble.when mascine milling wood one time a dont have good line,i have one line 0.1 mm ticknes,on one time
in all picture,and a have a quastion how to is ponit to ponit for milling the wood.

Please help me about problem with stripe in picture.

My knife is 0.3mm and step power is 0.12mm

best regards

Title: Re: Please help me
Post by: Tweakie.CNC on March 08, 2012, 07:36:45 AM

Hi jurbanek,

It would help if you could perhaps post a picture showing the stripe problem you are having.

Tweakie.