Chris,
I posted the link to the manual a couple of posts back.
There's mor in the Members Docs near the bottom end of the forum home page.
I've gotten tabs to work here 10 times in a row. (afraid to try 11)
Here's a quick rundown:
Select the profile to offset
Select the tool from the offsets tab and create the offset
Remove the original vectors (Rem. Objects)
In the Project tree, click the Offset layer
The Layer tab will open. Tool info should be there complete. Set Rapid H, Cut start, Cut depth then click Set Layer
Click Chains tab, Set Length, thknss, # of tabs, OK
POST
Works here everytime now.
Cheers,
Russ