Hello Guest it is August 03, 2020, 06:06:43 AM

Author Topic: Question about speeds  (Read 1481 times)

0 Members and 1 Guest are viewing this topic.

Question about speeds
« on: March 02, 2012, 10:37:15 PM »
I'm having a bit a confusion regarding the speeds set in Mach3.  

I went into the config and set the max speeds and all that good stuff, but I don't understand the relationship between that and the CAD software settings. Is the speed controlled by Mach3, the CAM software, or both?

Offline Hood

*
  •  25,846 25,846
  • Carnoustie, Scotland
    • View Profile
Re: Question about speeds
« Reply #1 on: March 03, 2012, 03:21:11 AM »
Both
G0 are what you set in motor tuning as your velocity.
G1, G2 etc with a F*** will move at the F rate you have set.

Hood