Hello Guest it is May 09, 2021, 04:55:02 AM

Author Topic: So now what????  (Read 3269 times)

0 Members and 1 Guest are viewing this topic.

Offline skaha

*
  •  57 57
  • My first attempt
    • View Profile
So now what????
« on: January 01, 2007, 04:37:53 PM »
I finally have my desktop up and running, I have cut roadrunners into every available piece of wood I could find, I find it hard to believe everyone is going out and spending 6 or 7 hundred dollars and up for cadcam programs, I have spent countless hours surfing the sites and now am completely confused. Help.
Terry

Offline Chaoticone

*
  • *
  •  5,626 5,626
  • Precision Chaos
    • View Profile
Re: So now what????
« Reply #1 on: January 01, 2007, 04:48:26 PM »
Lazy Cam is free with Mach. ;D I haven't used it but a lot of others have.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline skaha

*
  •  57 57
  • My first attempt
    • View Profile
Re: So now what????
« Reply #2 on: January 01, 2007, 04:54:49 PM »
Thanks Brett, I confess I don't know much about this area, but I will dive into lazy cam.
Terry

Offline skaha

*
  •  57 57
  • My first attempt
    • View Profile
Re: So now what????
« Reply #3 on: January 01, 2007, 06:20:04 PM »
Brett, I just sat and watched the videos on lazy cam, I guess I just have not explored all that mach is offering, it turned the lite on a lot of questions I had. Thanks again.
Terry

Offline Chaoticone

*
  • *
  •  5,626 5,626
  • Precision Chaos
    • View Profile
Re: So now what????
« Reply #4 on: January 01, 2007, 06:36:39 PM »
Your welcome Terry,
     The learning curve is only part of the infatuation. ;D

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: So now what????
« Reply #5 on: January 02, 2007, 09:10:45 AM »
Wurde  ;D