Hello Guest it is July 28, 2021, 04:06:00 AM

Author Topic: What should I see in the "Diagnostics Alt-7" window if Mach3 configured properly  (Read 15329 times)

0 Members and 1 Guest are viewing this topic.

Offline Blu

  •  5 5
    • View Profile

At the diagnostics window the "Time in Int." idles at ~3.5 without any G Code.  When I enter G Code or use the servo frequency generator the "Time in Int." fluctuates between 3 to 10. 

Throughout all commands the pulse frequency flutters just below 25KHz.


Offline Hood

  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
That sounds like the driver is working well. Not sure why you would see such changes when jogging X axis only