Hello Guest it is October 29, 2020, 07:34:55 AM

Author Topic: carefull using T5 belts/pulleys  (Read 1566 times)

0 Members and 1 Guest are viewing this topic.

Offline comet

  •  318 318
    • View Profile
carefull using T5 belts/pulleys
« on: February 06, 2012, 01:59:21 PM »
T5 belts and pulleys are not suitable for cnc drive systems.
I just had to replace them on mylatest build with 5M .
the problem is that the t5 system has backlash or clearence between the pully and belt tooth form.