Hello Guest it is March 28, 2024, 06:25:15 PM

Author Topic: Mach3 Web Site  (Read 5470 times)

0 Members and 1 Guest are viewing this topic.

Offline olf20

*
  •  325 325
    • View Profile
Mach3 Web Site
« on: January 22, 2012, 08:31:40 AM »
Any body having trouble with the web site loading???
I've been have trouble on and off for several months.
olf20 / Bob
Mach3, Atlas Knee Mill, 4th Axis, VcarvePro, ESS, Super PID.
Been Heating with corn since 1998

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Web Site
« Reply #1 on: January 22, 2012, 08:48:50 AM »
Just several months? You are lucky ;D
Hood

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Mach3 Web Site
« Reply #2 on: January 22, 2012, 09:00:39 AM »
For as long as I can remember, at least once or twice a week there are times when it's not working.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Mach3 Web Site
« Reply #3 on: January 22, 2012, 01:12:50 PM »
been down (with occasional ups) most of the weekend for me. If it gets any worse it'll be as bad as the zone!!!

Ian

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Mach3 Web Site
« Reply #4 on: January 22, 2012, 02:36:11 PM »
Twice today but don't know for how long. Would say around 6 times this week. Not too often around  5:30 am EST .
RICH
Re: Mach3 Web Site
« Reply #5 on: January 22, 2012, 06:39:23 PM »
Downloads lock up Firefox.  That's been happening since as long as I can remember and on numerous PC's.  Downloads through IE work fine.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Mach3 Web Site
« Reply #6 on: January 22, 2012, 06:57:24 PM »
Never seen that, and have always used FF.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Mach3 Web Site
« Reply #7 on: January 23, 2012, 09:09:40 AM »
FF here and no download issues.
Re: Mach3 Web Site
« Reply #8 on: January 23, 2012, 11:47:26 PM »
FF here and lots of connection problems here on and off for a long time.  Two different computers and ISP connections - cable and fiber optic - wired and wireless.  Regional issue?

Regards,
John Champlain
www.picengrave.com

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Web Site
« Reply #9 on: January 24, 2012, 03:17:06 AM »
The issues with the connections every now and then are nothing to do with ISP or region, its the server that is the problem. FF locking up on downloads I have no idea, I use opera and have never had a problem and it seems lots of others use FF and dont have issues with downloads either.
Hood