Hello Guest it is November 19, 2019, 12:40:19 PM

Author Topic: Mach 3 wont start the spindle  (Read 15879 times)

0 Members and 1 Guest are viewing this topic.

Re: Mach 3 wont start the spindle
« Reply #10 on: January 19, 2012, 07:56:14 PM »
Hi Bob

Not sure what I have done but the spindle now works with the toggle button.  I have run a very short gcode and for the first time the spindle ran up.  Thank you.  The first time i entered M3 s1000 in the MDI screen it worked, since then I have tried a number of times and i just get the error message saying a limit switch has been triggered - no limit switches have been hit.

In answer to your question, I only have three stepper motors and the spindle - no other devices.

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Mach 3 wont start the spindle
« Reply #11 on: January 20, 2012, 04:34:12 AM »
Dotty - You are using a pirate licence - You will get no further help here. If you feel this is in error contact Mach licencing support.
« Last Edit: January 20, 2012, 05:55:52 AM by stirling »