Hello Guest it is January 23, 2022, 02:32:18 PM

Author Topic: Mach 3 G-Code conversion  (Read 2463 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 G-Code conversion
« on: January 17, 2012, 03:35:23 PM »
Hey everyone. I'm having a huge problem. I use artcam and when I build my g-code, everything works great. But now, I lost my file completely from Artcam and I was hoping that there is a way to convert my G-Code into something else. Any type of vector file.

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Mach 3 G-Code conversion
« Reply #1 on: January 17, 2012, 03:49:03 PM »
I have not used it, but I saw this the other day:

http://www.cnczone.com/forums/opensource_software/8814-g-code_dxf.html

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline RICH

*
  • *
  •  7,422 7,422
    • View Profile
Re: Mach 3 G-Code conversion
« Reply #2 on: January 17, 2012, 06:04:09 PM »
Post the gcode file and maybe someone will back plot the gcode to a dxf file.
RICH