Hello Guest it is March 29, 2024, 05:21:44 AM

Author Topic: Mach 3 Turn Problem - any pointers please  (Read 5086 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Mach 3 Turn Problem - any pointers please
« Reply #10 on: January 20, 2012, 06:38:18 AM »
 I wonder how the manuals are updated

Can ony address the ones that I wrote. There are only a few changes required since it was originaly posted and
wanted to let time take it's course....which is now a few years ;).  It's good for a writer to let it sit and then go back and read it since the dumb things become apparent.

For anything that was written by me,  I just make notes on my copy from posted replies, with the intent of udating it.
That requires reading / scanning every post that's made on the site and being aware of Mach changes. I have never recieved any feed back on the bulk of them and i know for a fact that i am not that good at writing about something.
  
Will update it and repost it in Members Docs.

RICH