Hello Guest it is July 17, 2019, 01:16:08 PM

Author Topic: .stl and 3D relief's.  (Read 16759 times)

0 Members and 1 Guest are viewing this topic.

Offline Tweakie.CNC

*
  • *
  •  7,844 7,844
  • Super Kitty
    • View Profile
    • Tweakie.CNC
.stl and 3D relief's.
« on: January 14, 2012, 08:27:07 AM »
Hi Guys,

For those interested in free 3D reliefs, stl files and 3D machining a 'must visit' is the Hungarian website  http://hobbycncart.com/  Their Download section contains the largest selection of free to download relief’s I think I have ever seen in any one place. The site has a support forum, the members are almost all Mach3 users and the quality of the work they produce and show is just excellent. Well worth a visit.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: .stl and 3D relief's.
« Reply #1 on: January 14, 2012, 09:58:29 AM »
Quote
the members are almost all Mach3 users
Isn't everyone a Mach3 user? ;)
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Tweakie.CNC

*
  • *
  •  7,844 7,844
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: .stl and 3D relief's.
« Reply #2 on: January 14, 2012, 11:18:49 AM »
Quite right Gerry - If they are not then they aught to be  ;D
Leave it with me, I will convert any non-believers.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: .stl and 3D relief's.
« Reply #3 on: January 14, 2012, 03:30:26 PM »
Quite right Gerry - If they are not then they aught to be  ;D
Leave it with me, I will convert any non-believers.

Tweakie.

Terry, I can hear Tweakie calling you!  ;)
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline BR549

*
  •  6,874 6,874
    • View Profile
Re: .stl and 3D relief's.
« Reply #4 on: January 14, 2012, 05:30:41 PM »
I am just sitting here SMILING (;-) like the old fat  CAT.

Tweakie   MUST mean  squeaky (as in wheel) across the big pond.

Ya made me smile, (;-) TP

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: .stl and 3D relief's.
« Reply #5 on: January 14, 2012, 08:06:05 PM »
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Tweakie.CNC

*
  • *
  •  7,844 7,844
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: .stl and 3D relief's.
« Reply #6 on: January 15, 2012, 04:55:39 AM »
Not quite sure I understand the humour guys, but if it makes you smile then that's just fine by me.  ;D

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline RICH

*
  • *
  •  7,341 7,341
    • View Profile
Re: .stl and 3D relief's.
« Reply #7 on: January 15, 2012, 09:24:50 AM »
Quote
Leave it with me, I will convert any non-believers.

Some have gone over to the "Dark Side"  may the " force be with you".  :)

RICH

Offline BR549

*
  •  6,874 6,874
    • View Profile
Re: .stl and 3D relief's.
« Reply #8 on: January 15, 2012, 11:29:56 AM »
BUT I still have 1 machine running on mach3(;-) Plasma

I was just picking on you. The subject came up about the time a discussion was running about tying up programming time to solve rarely used functions problems instead of working on CORE mach3 problems. I call it the squeaky wheel syndrome. where the squeaky wheel ALWAYS get the oil to make it run quieter.

In no way is that implying your problem was not important.  Probably just Yankee humor run amuck on this side of the pond.

(;-) TP
« Last Edit: January 15, 2012, 11:35:03 AM by BR549 »