Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Tweakie.CNC on January 14, 2012, 08:27:07 AM

Title: .stl and 3D relief's.
Post by: Tweakie.CNC on January 14, 2012, 08:27:07 AM

Hi Guys,

For those interested in free 3D reliefs, stl files and 3D machining a 'must visit' is the Hungarian website  http://hobbycncart.com/  Their Download section contains the largest selection of free to download relief’s I think I have ever seen in any one place. The site has a support forum, the members are almost all Mach3 users and the quality of the work they produce and show is just excellent. Well worth a visit.

Tweakie.

Title: Re: .stl and 3D relief's.
Post by: ger21 on January 14, 2012, 09:58:29 AM

Quote

the members are almost all Mach3 users

Isn't everyone a Mach3 user? ;)

Title: Re: .stl and 3D relief's.
Post by: Tweakie.CNC on January 14, 2012, 11:18:49 AM

Quite right Gerry - If they are not then they aught to be  ;D
Leave it with me, I will convert any non-believers.

Tweakie.

Title: Re: .stl and 3D relief's.
Post by: budman68 on January 14, 2012, 03:30:26 PM

Quote from: Tweakie.CNC on January 14, 2012, 11:18:49 AM

Quite right Gerry - If they are not then they aught to be  ;D
Leave it with me, I will convert any non-believers.

Tweakie.

Terry, I can hear Tweakie calling you!  ;)

Title: Re: .stl and 3D relief's.
Post by: BR549 on January 14, 2012, 05:30:41 PM

I am just sitting here SMILING (;-) like the old fat  CAT.

Tweakie   MUST mean  squeaky (as in wheel) across the big pond.

Ya made me smile, (;-) TP

Title: Re: .stl and 3D relief's.
Post by: budman68 on January 14, 2012, 08:06:05 PM

Quote from: BR549 on January 14, 2012, 05:30:41 PM

Ya made me smile, (;-) TP

 ;D


Dave

Title: Re: .stl and 3D relief's.
Post by: Tweakie.CNC on January 15, 2012, 04:55:39 AM

Not quite sure I understand the humour guys, but if it makes you smile then that's just fine by me.  ;D

Tweakie.

Title: Re: .stl and 3D relief's.
Post by: RICH on January 15, 2012, 09:24:50 AM

Quote

Leave it with me, I will convert any non-believers.

Some have gone over to the "Dark Side"  may the " force be with you".  :)

RICH

Title: Re: .stl and 3D relief's.
Post by: BR549 on January 15, 2012, 11:29:56 AM

BUT I still have 1 machine running on mach3(;-) Plasma

I was just picking on you. The subject came up about the time a discussion was running about tying up programming time to solve rarely used functions problems instead of working on CORE mach3 problems. I call it the squeaky wheel syndrome. where the squeaky wheel ALWAYS get the oil to make it run quieter.

In no way is that implying your problem was not important.  Probably just Yankee humor run amuck on this side of the pond.

(;-) TP