Hello Guest it is April 18, 2024, 04:06:08 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Please define "part Zero"  (Read 2195 times)

0 Members and 1 Guest are viewing this topic.

Offline Fred_evans

*
  • 396 396
    • View Profile
Please define "part Zero"
« on: January 12, 2012, 09:52:57 AM »
Hello All

Mach3 turn

on the mach3 screen there are buttons called "part Zero X " part zeroY"

Please define what this means?

Thanks Fred
Logged
think of the trees-- use both sides of the computer paper

Offline budman68

*
  • *
  • 2,352 2,352
    • View Profile
Re: Please define "part Zero"
« Reply #1 on: January 12, 2012, 05:45:42 PM »
Hi Fred,

Please have a look at the video called Introduction to Turn.

http://www.machsupport.com/videos/

Dave
Logged
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Fred_evans

*
  • 396 396
    • View Profile
Re: Please define "part Zero"
« Reply #2 on: January 13, 2012, 02:45:14 AM »
Thanks-- I never saw this page before - i will go through all of them

regards fred
Logged
think of the trees-- use both sides of the computer paper

Offline budman68

*
  • *
  • 2,352 2,352
    • View Profile
Re: Please define "part Zero"
« Reply #3 on: January 13, 2012, 04:46:18 AM »
You're very welcome, Fred, it's in the menu right at the top of this page under "Support".

Also, they've made many changes visually and functionally in Mach since those videos were made so don't be alarmed if things look a bit different in the videos  ;)

Dave
Logged
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Pages: 1   Go Up
« previous next »