Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Fred_evans on January 12, 2012, 09:52:57 AM

Title: Please define "part Zero"
Post by: Fred_evans on January 12, 2012, 09:52:57 AM

Hello All

Mach3 turn

on the mach3 screen there are buttons called "part Zero X " part zeroY"

Please define what this means?

Thanks Fred

Title: Re: Please define "part Zero"
Post by: budman68 on January 12, 2012, 05:45:42 PM

Hi Fred,

Please have a look at the video called Introduction to Turn.

http://www.machsupport.com/videos/

Dave

Title: Re: Please define "part Zero"
Post by: Fred_evans on January 13, 2012, 02:45:14 AM

Thanks-- I never saw this page before - i will go through all of them

regards fred

Title: Re: Please define "part Zero"
Post by: budman68 on January 13, 2012, 04:46:18 AM

You're very welcome, Fred, it's in the menu right at the top of this page under "Support".

Also, they've made many changes visually and functionally in Mach since those videos were made so don't be alarmed if things look a bit different in the videos  ;)

Dave