Hello Guest it is March 28, 2024, 07:46:28 AM

Author Topic: How to force MACH not accelerate in the middle of engraving ?  (Read 2363 times)

0 Members and 1 Guest are viewing this topic.

How to force MACH not accelerate in the middle of engraving ?
« on: January 11, 2012, 01:49:54 PM »
Hi,

Engraving require constant speed in all lenght of the scanning line except start and stop
Did anybody know how to force mach to not accelerate between engraving line start and stop ?

Dave


Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: How to force MACH not accelerate in the middle of engraving ?
« Reply #1 on: January 11, 2012, 02:12:29 PM »
You can't, unless you know how to defy the laws of physics.

Sounds like you need to increase your acceleration rate.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: How to force MACH not accelerate in the middle of engraving ?
« Reply #2 on: January 11, 2012, 02:27:06 PM »
I don`t understand your answer ......

I don`t want a eliminate acceleration ! Just in the middle of laser engraving !

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: How to force MACH not accelerate in the middle of engraving ?
« Reply #3 on: January 11, 2012, 02:33:56 PM »
If you have corners anywhere in your engraving, the machine will have to decelerate and accelerate. The best thing you can do is play with the CV settings to get it as smooth as possible.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: How to force MACH not accelerate in the middle of engraving ?
« Reply #4 on: January 13, 2012, 05:32:03 AM »
Just quick question to clarify: is it pausing midle of movement if you command axis using mdi?
If it is, then do you have backlash comp enabled?
If ansver is yes then try whitout comp. It maybe curable lovering shuttle acceleration setting and tuning backlash speed.