Hello Guest it is March 29, 2024, 02:42:23 AM

Author Topic: Fixture Plate  (Read 2144 times)

0 Members and 1 Guest are viewing this topic.

Fixture Plate
« on: January 06, 2012, 09:57:07 PM »
Made a fixture plate a few weeks ago. I Have two Emco vises alike so I put hole patterns to match them.
I spaced all the other holes .5 apart & staggered @ 1/4".
I ended up with 186   10-32 tapped holes, I made it at work on my HAAS VF-3.
« Last Edit: January 06, 2012, 10:09:47 PM by Speedtwin69 »
Proper Planning Prevents Piss Poor Perfomance
Re: Fixture Plate
« Reply #1 on: January 06, 2012, 11:27:10 PM »
I also recieved a new dc motor, in my enclosure it is 8 decibels.
Very quite, added dro to each of the 3 axis's.
Installed 1400 cubic ft. Per hour exhaust fan, average temp 70 degrees.
« Last Edit: January 06, 2012, 11:41:43 PM by Speedtwin69 »
Proper Planning Prevents Piss Poor Perfomance