Hello Guest it is June 08, 2023, 09:37:38 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Fixture Plate  (Read 1999 times)

0 Members and 1 Guest are viewing this topic.

Offline Speedtwin69

*
  • 19 19
    • View Profile
Fixture Plate
« on: January 06, 2012, 09:57:07 PM »
Made a fixture plate a few weeks ago. I Have two Emco vises alike so I put hole patterns to match them.
I spaced all the other holes .5 apart & staggered @ 1/4".
I ended up with 186   10-32 tapped holes, I made it at work on my HAAS VF-3.
« Last Edit: January 06, 2012, 10:09:47 PM by Speedtwin69 »
Logged
Proper Planning Prevents Piss Poor Perfomance

Offline Speedtwin69

*
  • 19 19
    • View Profile
Re: Fixture Plate
« Reply #1 on: January 06, 2012, 11:27:10 PM »
I also recieved a new dc motor, in my enclosure it is 8 decibels.
Very quite, added dro to each of the 3 axis's.
Installed 1400 cubic ft. Per hour exhaust fan, average temp 70 degrees.
« Last Edit: January 06, 2012, 11:41:43 PM by Speedtwin69 »
Logged
Proper Planning Prevents Piss Poor Perfomance
Pages: 1   Go Up
« previous next »