Hello Guest it is March 29, 2024, 07:30:38 AM

Author Topic: color of the display window  (Read 2161 times)

0 Members and 1 Guest are viewing this topic.

color of the display window
« on: December 03, 2011, 02:04:19 PM »
Hello All

Is there a way in which the default colors used in the toolpath display can be changed.

The position of my lathe in relation to the window in the room makes the default color

very difficult to see ( in fact when there is sun it is almost invisible)

thanks and beat regards
fred evans
think of the trees-- use both sides of the computer paper

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: color of the display window
« Reply #1 on: December 03, 2011, 02:48:07 PM »
Config > Toolpath

You can change the colors of the lines, but Mach won't let you use some colors.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: color of the display window
« Reply #2 on: December 04, 2011, 02:43:55 PM »
Thanks that helped!!
think of the trees-- use both sides of the computer paper