Hello Guest it is November 20, 2019, 04:23:10 AM

Author Topic: CutViewer  (Read 2288 times)

0 Members and 1 Guest are viewing this topic.

CutViewer
« on: November 12, 2011, 05:26:51 AM »
Hello,

i got a Rapid Collision detection by CutViewer but i see nothing wrong.
Can somebody help me ? joined screen copy of CutViewer with G-Code.
Does i need to define the tool size ? (already done with MeshCam).

Thanks

Offline Tweakie.CNC

*
  • *
  •  8,005 8,005
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: CutViewer
« Reply #1 on: November 12, 2011, 11:15:07 AM »
Perhaps you need to look at whatever program you used to create the GCode in the first place. This is not a Mach problem so why would we expect Mach to compensate for it ??

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
Re: CutViewer
« Reply #2 on: November 13, 2011, 03:12:15 PM »
I don't see anything wrong.
May want to post on the MeshCam site and see if you get comments.
RICH