Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: michel-cnc on November 12, 2011, 05:26:51 AM
-
Hello,
i got a Rapid Collision detection by CutViewer but i see nothing wrong.
Can somebody help me ? joined screen copy of CutViewer with G-Code.
Does i need to define the tool size ? (already done with MeshCam).
Thanks
-
Perhaps you need to look at whatever program you used to create the GCode in the first place. This is not a Mach problem so why would we expect Mach to compensate for it ??
Tweakie.
-
I don't see anything wrong.
May want to post on the MeshCam site and see if you get comments.
RICH