Hello Guest it is March 28, 2024, 04:45:29 AM

Author Topic: History button  (Read 2895 times)

0 Members and 1 Guest are viewing this topic.

History button
« on: November 07, 2011, 03:46:38 AM »
Hi, I would like to be able to read the last messages that went through the "status" line, as sometimes I have messages after messages and the user have no time to read them. Looking in the available resources of Mach, there is a button that is "History", that does not do anything - at least with my setup.

1) There is a way to have those messages available?
2) What does the history button do?

Thank you

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: History button
« Reply #1 on: November 07, 2011, 11:10:59 AM »
The history button brings up a list of all the old error messages that you see in the session you are using.

When you shut down mach the list clears and you start all over again.

(;-) TP
Re: History button
« Reply #2 on: November 07, 2011, 11:46:12 AM »
Thank you,
Then there is no way to get the old status messages (not only error messages) ?

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: History button
« Reply #3 on: November 07, 2011, 12:02:28 PM »
You will get ALL the messages that mach puts out during that session.

PUSH THE BUTTON then you will know(;-)

(;-) TP
Re: History button
« Reply #4 on: November 07, 2011, 12:12:45 PM »
Ups, it seams that the text editor must be on so that this works. I pushed the button and saw nothing ...
Thank you sir.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: History button
« Reply #5 on: November 07, 2011, 12:17:47 PM »
No the text editor does not have to be ON. BUT you may not have selected a text editor ???

Here all you do it PUSH the button and up pops Notepad with the history file loaded.

(;-) TP