Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ftomazz on November 07, 2011, 03:46:38 AM
-
Hi, I would like to be able to read the last messages that went through the "status" line, as sometimes I have messages after messages and the user have no time to read them. Looking in the available resources of Mach, there is a button that is "History", that does not do anything - at least with my setup.
1) There is a way to have those messages available?
2) What does the history button do?
Thank you
-
The history button brings up a list of all the old error messages that you see in the session you are using.
When you shut down mach the list clears and you start all over again.
(;-) TP
-
Thank you,
Then there is no way to get the old status messages (not only error messages) ?
-
You will get ALL the messages that mach puts out during that session.
PUSH THE BUTTON then you will know(;-)
(;-) TP
-
Ups, it seams that the text editor must be on so that this works. I pushed the button and saw nothing ...
Thank you sir.
-
No the text editor does not have to be ON. BUT you may not have selected a text editor ???
Here all you do it PUSH the button and up pops Notepad with the history file loaded.
(;-) TP