Hello Guest it is November 14, 2019, 01:09:07 AM

Author Topic: DSP/MC difference  (Read 3958 times)

0 Members and 1 Guest are viewing this topic.

DSP/MC difference
« on: October 20, 2011, 11:44:12 PM »
What is the difference between the DSP/MC "S" and "M" models?

TIA

Todd
Re: DSP/MC difference
« Reply #1 on: October 21, 2011, 03:54:44 AM »
HI Todd,
One has analog inputs and one doesn't IIRC.

Mike
We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.
Re: DSP/MC difference
« Reply #2 on: October 23, 2011, 01:38:55 AM »
Thanks for the reply I guess just possible expansion or need I will save for the model with analog inputs.

Which model do you have?

Todd
Re: DSP/MC difference
« Reply #3 on: October 23, 2011, 04:02:20 AM »
I have the 7761M which is the first generation and the 7762M, which is the current version. The current version has double the I/O of the old version. Both have the analog inputs.

I also have a bets version of the new stepper board called the Hiconn. I have it hooked up to my lathe and early indications are that it is going to be great.
Ethernet interface and lots of I/O with analog spindle support built in. More info to come as I do more work on it. Threading is already done but I haven't had a chance to try it.

Mike
We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.
Re: DSP/MC difference
« Reply #4 on: November 09, 2011, 08:48:41 PM »
Hiconn sounds interesting.  have any idea of when we will get details?