Machsupport Forum

Third party software and hardware support forums. => dspMC/IP Motion Controller => Topic started by: T63-A-700 on October 20, 2011, 11:44:12 PM

Title: DSP/MC difference
Post by: T63-A-700 on October 20, 2011, 11:44:12 PM
What is the difference between the DSP/MC "S" and "M" models?

TIA

Todd
Title: Re: DSP/MC difference
Post by: TOTALLYRC on October 21, 2011, 03:54:44 AM
HI Todd,
One has analog inputs and one doesn't IIRC.

Mike
Title: Re: DSP/MC difference
Post by: T63-A-700 on October 23, 2011, 01:38:55 AM
Thanks for the reply I guess just possible expansion or need I will save for the model with analog inputs.

Which model do you have?

Todd
Title: Re: DSP/MC difference
Post by: TOTALLYRC on October 23, 2011, 04:02:20 AM
I have the 7761M which is the first generation and the 7762M, which is the current version. The current version has double the I/O of the old version. Both have the analog inputs.

I also have a bets version of the new stepper board called the Hiconn. I have it hooked up to my lathe and early indications are that it is going to be great.
Ethernet interface and lots of I/O with analog spindle support built in. More info to come as I do more work on it. Threading is already done but I haven't had a chance to try it.

Mike
Title: Re: DSP/MC difference
Post by: sparky3 on November 09, 2011, 08:48:41 PM
Hiconn sounds interesting.  have any idea of when we will get details?