Hello
Guest
it is
March 28, 2024, 09:45:38 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
How to make DB25 Male to DB25 Female Parallel Cable
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: How to make DB25 Male to DB25 Female Parallel Cable (Read 4277 times)
0 Members and 1 Guest are viewing this topic.
dsplastx
6
How to make DB25 Male to DB25 Female Parallel Cable
«
on:
October 17, 2011, 01:29:40 PM »
Hello friends i received mu machine today and i hawe a problem i need to build a DB25 Male to DB25 Female Parallel Cable.
Because i hawe Male on controler and Female on Desktop.
Please can somebody with more expiriens help and send me som shematic so i dont make a mistake i hawe already bu a male and female conector and cable.
I wud bu it wery well but in mu town they have onlu Male to Male .
Thanks in advans.
Logged
Hood
25,835
Carnoustie, Scotland
Re: How to make DB25 Male to DB25 Female Parallel Cable
«
Reply #1 on:
October 17, 2011, 03:40:31 PM »
Just connect pin for pin, the numbers of the pins will be on each connector so 1 to 1, 2 to 2, 3 to 3 etc
Hood
Logged
dsplastx
6
Re: How to make DB25 Male to DB25 Female Parallel Cable
«
Reply #2 on:
October 17, 2011, 03:48:09 PM »
Thank you very much i soused that they all parallel but i don't no that i haw to connect all of they 25 so you say that doesent mather.
And please if its not a problem i haw read on controller that is some omega systems 3 axis controller and i don't understand and i don't ha we no driver received wit him .
Do i need some additional driver or will that do the Mach3 bu him self.
Thanks again and sorry for mu treble English.
OO that spell check is great now is great.
«
Last Edit: October 17, 2011, 03:52:18 PM by dsplastx
»
Logged
Hood
25,835
Carnoustie, Scotland
Re: How to make DB25 Male to DB25 Female Parallel Cable
«
Reply #3 on:
October 18, 2011, 06:55:44 AM »
I am sorry I dont know what you are asking
Hood
Logged
dsplastx
6
Re: How to make DB25 Male to DB25 Female Parallel Cable
«
Reply #4 on:
October 18, 2011, 08:53:30 AM »
OK i will true .
I with the machine i have also received a motor control box with controller.
In the box is some OMEGA SYSTEMS controller.
But i have not received any driver for the controller.
Now if i connect the controller on mach3 Vile the software find the driver file.
Logged
Hood
25,835
Carnoustie, Scotland
Re: How to make DB25 Male to DB25 Female Parallel Cable
«
Reply #5 on:
October 18, 2011, 12:27:54 PM »
Do you have a link to the controller you have so that I can see?
Hood
Logged
Print
Pages:
1
Go Up
« previous
next »