Hello Guest it is March 28, 2024, 07:53:45 AM

Author Topic: NCStudio to Mach change over.  (Read 3854 times)

0 Members and 1 Guest are viewing this topic.

NCStudio to Mach change over.
« on: October 09, 2011, 03:32:42 AM »
Looking for info on what would be involved to change a router from NC Studio to Mach 3.
wjf

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: NCStudio to Mach change over.
« Reply #1 on: October 09, 2011, 06:33:56 AM »
Know nothing about NC Studio.
Provide a link for info on  NC Studio, machine type, and controller type and maybe some will have a look  and give some high level guidance.
RICH
Re: NCStudio to Mach change over.
« Reply #2 on: October 09, 2011, 10:59:28 AM »

This link will give a brief description of NCStudio.

http://www.erel-cnc.de/html-uk-cnc/software-uk.html
wjf

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: NCStudio to Mach change over.
« Reply #3 on: October 09, 2011, 12:47:08 PM »
The controlling program uses a dedicated card. So to change over you would use the PP (or something like the Smootstepper ) and use Mach as the controlling program.
RICH