Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: williecnc on October 09, 2011, 03:32:42 AM

Title: NCStudio to Mach change over.
Post by: williecnc on October 09, 2011, 03:32:42 AM

Looking for info on what would be involved to change a router from NC Studio to Mach 3.
wjf

Title: Re: NCStudio to Mach change over.
Post by: RICH on October 09, 2011, 06:33:56 AM

Know nothing about NC Studio.
Provide a link for info on  NC Studio, machine type, and controller type and maybe some will have a look  and give some high level guidance.
RICH

Title: Re: NCStudio to Mach change over.
Post by: williecnc on October 09, 2011, 10:59:28 AM

This link will give a brief description of NCStudio.

http://www.erel-cnc.de/html-uk-cnc/software-uk.html
wjf

Title: Re: NCStudio to Mach change over.
Post by: RICH on October 09, 2011, 12:47:08 PM

The controlling program uses a dedicated card. So to change over you would use the PP (or something like the Smootstepper ) and use Mach as the controlling program.
RICH