Hello Guest it is June 24, 2019, 08:34:39 PM

Author Topic: Good Vendor for L Type Gearing  (Read 1987 times)

0 Members and 1 Guest are viewing this topic.

Offline ThomasCB21

*
  •  19 19
  • If it ain't fun, don't do it!
    • View Profile
Good Vendor for L Type Gearing
« on: August 09, 2011, 12:54:19 PM »
Hi folks,

I know this is probably not the place to ask.  I have been asking questions and I have been getting my plans together.  So my next question is,  "Who know of a good and reasonable (cheap, cheap goes the birdy! :D ) vendor that sells L Type Gears? (these use a size 75 synchronous type belt)"  As always any information is greatly appreciated and adds to my knowledge base.

Thanks,
Chris

Offline RICH

*
  • *
  •  7,338 7,338
    • View Profile
Re: Good Vendor for L Type Gearing
« Reply #1 on: August 11, 2011, 07:13:16 PM »
Try MSG Industrial Supply as they may have plastic ones.

 Heck, make your owne from bar stock borrowed from a friend and make sure you get the cutter to go with the stock! >:D
You did say cheap cheap ........ ;) :) :D ;D

RICH

Offline ThomasCB21

*
  •  19 19
  • If it ain't fun, don't do it!
    • View Profile
Re: Good Vendor for L Type Gearing
« Reply #2 on: August 11, 2011, 08:51:07 PM »
Thanks Rich, I'll check them out.  Say can I borrow some bar stock and the cutter?  :D

Chris

Offline RICH

*
  • *
  •  7,338 7,338
    • View Profile
Re: Good Vendor for L Type Gearing
« Reply #3 on: August 12, 2011, 05:53:11 AM »
Sorry Chris,
Can't lend you anything....my friends do all my programming and machining.  ??? ;)
RICH