Hello Guest it is July 18, 2019, 10:17:36 PM

Author Topic: Motor Config. Using Probotix  (Read 1908 times)

0 Members and 1 Guest are viewing this topic.

Motor Config. Using Probotix
« on: July 03, 2011, 05:41:50 PM »
I'm using stepper motors, set in a 1/2 step mode.  What should the steps per rev be set at.  I have mine set at 1000.

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Motor Config. Using Probotix
« Reply #1 on: July 03, 2011, 06:53:25 PM »
400 would be normal steps per rev with half stepping. Unless that is your steppers are the more uncommon 0.9 degree ones in which case it would be 800.
Hood
« Last Edit: July 03, 2011, 06:55:54 PM by Hood »
Re: Motor Config. Using Probotix
« Reply #2 on: July 03, 2011, 08:38:26 PM »
 :)Thanks for the help.