Hello Guest it is June 16, 2019, 01:32:42 AM

Author Topic: Hand Pendant MPG  (Read 14339 times)

0 Members and 1 Guest are viewing this topic.

Vmax

*
Hand Pendant MPG
« on: January 26, 2006, 10:51:23 PM »
Modio Hand Pendant MPG

ynneb

*
Re: Hand Pendant MPG
« Reply #1 on: January 26, 2006, 11:06:05 PM »
Sweet.

What was the build cost?
Re: Hand Pendant MPG
« Reply #2 on: January 27, 2006, 07:15:03 AM »
The labels look good. How about a peek at the inside?

Darek

Offline Bloy

*
  •  159 159
    • View Profile
Re: Hand Pendant MPG
« Reply #3 on: January 27, 2006, 11:49:42 AM »
Here is a picture of the inside.....from the photos in Terry's album in the yahoo group.   The case is from "mouser", P/N 563-HH-3420
cost $19.00 USD
for more information see post:
  http://groups.yahoo.com/group/mach1mach2cnc/message/44347


John(bloy)

P.S. Terry, I hope you don't mind me bringing it here without asking you first....
« Last Edit: January 27, 2006, 12:59:49 PM by Bloy »

Vmax

*
Re: Hand Pendant MPG
« Reply #4 on: January 28, 2006, 10:17:48 AM »
There are two ways to go about building the pendant. One is to mount everything inside the pendant housing. Two is to remote mount the MODIO in the control box and remote mount the LCD display in the pendant.

The last One I biult has the MODIO remote mounted in the cabinet as I have other chores for it to do also. That makes it easirer to hook up to other devices.

Parts List

1     MODIO board            98.00
1     LCD display                27.00
1     MPG                        130.00
2     6 pos Rotary switches    8.00
3     Push Button Swt           6.00
2     Knobs                        4.00
1     Case Assy                 20.00
1     10' cable DB37            40.00
1     DB37 soldier Con.          3.00
1     Ribbon cable Adapt.       2.00
                                    ------------
                     Total        $ 338.00

All the pieces will fit inside the case
Re: Hand Pendant MPG
« Reply #5 on: February 06, 2006, 12:06:15 PM »
I want to build one of these!!!  Wow.  Just one question:  What do the push buttons do? 


I am new, but diving in with both feet, so I have 3 cnc machines.  (little hobby ones)  I'm controlling all three with one PC.  (Even though I have three lincenses of Mach, and can only operate one at a time)  This little baby would allow me to remotely jog and ????   Love it.

Vmax

*
Re: Hand Pendant MPG
« Reply #6 on: February 06, 2006, 12:21:36 PM »
Currently the buttons are not being used until I figure out what I want to do with them. I do a lot of fixture and part setup ( old parts being refurbished, new parts being remachined correctly) and it is very clumsy without the hand pendant to jog between the test points.  Thanks goes to

Art
John P
Andy
Peter
All I had to do was assemble the parts and work out the particulars  (:~)= Terry
Re: Hand Pendant MPG
« Reply #7 on: October 24, 2006, 02:38:42 AM »
Are you using a macro for the functions of the rotary switches?
Re: Hand Pendant MPG
« Reply #8 on: February 19, 2007, 05:03:33 PM »
Hi Terry & Peter

Anyone know what was used to make the Labels for this Pendent?  Looks nice.
Would like to do something similar for my Pendent.

Thanks.

Willy
Re: Hand Pendant MPG
« Reply #9 on: February 21, 2007, 09:45:01 PM »
anyone know of a set of schematics for a striped down version of the "Modio Hand Pendant MPG" only without the digital readout like the one shown in the picture above?
Rob C.