0 Members and 1 Guest are viewing this topic.
Ok, i'm just starting with tool offsets and i've got an 8 station tool changer. When i write gcode manually and have to make a tool change what do i have to put in to make the change and get mach to see the offset.i can get the change done with m6txx but how do i get the offset to apply. Do i have to add g43 hxx before the m6txx.If that works how do i get the second tool offset for tool 1 to work.?
Thanks Derek, i have the tool offsets stored and the g43 seems to work. The second tool offset is the multiple offsets on each tool position (m6 t0101) (m6 t0102), i take it you call them with the h1, h2, h3 ect.