Hello Guest it is June 05, 2025, 11:02:38 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Mach3 TCP/IP Modbus config setup  (Read 16892 times)

0 Members and 1 Guest are viewing this topic.

Offline poppabear

*
  • *
  • 2,235 2,235
  • Briceville, TN, USA
Mach3 TCP/IP Modbus config setup
« on: April 22, 2011, 09:51:41 PM »
Here is a screen shot of the current PKE, modbus tcp config window.

Note: There are some issues with, PWM, and MPGs, that the registers from the PKE will need to be cut down to 16 bits from 32, He is working on that.

Here is a screen shot.

scott
Logged
fun times

Offline fishin_fl

*
  • 39 39
Re: Mach3 TCP/IP Modbus config setup
« Reply #1 on: March 01, 2013, 11:24:58 AM »
How did the modbus tcp/ip doing with mach 3.  I am just starting my journey on this configuration and am in the dark so any help would be great.  I was wanting to stop, start, vary speed, maybe monitor load amperage of spindle.  I am running a VFD drive that has the capability to us modbus tcp/ip over ethernet, or modbus rtu via rs485.  Any help would help would be great. 

Brooks Nelson
Logged
Pages: 1   Go Up
« previous next »