Hello Guest it is March 28, 2024, 07:12:30 AM

Author Topic: Add DRO for rapid feed rate override  (Read 2882 times)

0 Members and 1 Guest are viewing this topic.

Add DRO for rapid feed rate override
« on: March 30, 2011, 03:09:23 PM »
Would like to add a DRO for Rapid feed rate override.

On my pendant, I have a 3 positions rotary switch that I would like to use to set rapid feed rate to 25%, 50% and 100%

I use 3 inputs on the ModIO, no analog input available.

If for example, the switch is on position 25%, would like to write that value to that DRO, and so on for 50% and 100%.

I have tried to write a brain but stuck with it.

Is someone have any idea on how can I do that or any clue would be really appreciated.

I already set up a Spindle speed override, feed override and the third analog input is for the MPG selection mode.

Jeff

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Add DRO for rapid feed rate override
« Reply #1 on: March 30, 2011, 06:17:25 PM »
Any idea what the input format is in a Brain for the ModIO? Afraid I dont as I have never used one but the rest is easy enough.
Hood
Re: Add DRO for rapid feed rate override
« Reply #2 on: March 30, 2011, 11:49:31 PM »
That is the ''easy part enough'' that I have problem with.

I don't know how to do it with brain.


Jeff

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Add DRO for rapid feed rate override
« Reply #3 on: March 31, 2011, 03:29:51 AM »
Do you know what form the ModIO inputs are in a Brain. I know what the Brain needs in the Modbus ranges for my PLC but the ModIO will likely be totally different.
Hood