Hello Guest it is March 28, 2024, 07:41:20 AM

Author Topic: DRIVER TEST: Compatibility problem  (Read 2723 times)

0 Members and 1 Guest are viewing this topic.

Offline asa

*
  •  2 2
    • View Profile
DRIVER TEST: Compatibility problem
« on: March 17, 2011, 09:56:38 PM »
hello,
when i run driver test, continous(merged) bars are displayed, tried to set pc to "standard pc" but i m not able to, it doesnt reboots.
tried installing fresh OS with this setting but its not getting installed.
what should i do?

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: DRIVER TEST: Compatibility problem
« Reply #1 on: March 18, 2011, 03:18:53 AM »
If you have installed a fresh copy of the OS and trie the steps outl;ined in the optomisation document then a PCI parallel port may work, if not you will have to try another computer.
Hood

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: DRIVER TEST: Compatibility problem
« Reply #2 on: March 18, 2011, 06:55:32 PM »
You need to set standard PC in the bios, then re-install windows.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline asa

*
  •  2 2
    • View Profile
Re: DRIVER TEST: Compatibility problem
« Reply #3 on: March 18, 2011, 06:59:08 PM »
how to set BIOS?