Hello Guest it is December 15, 2019, 09:08:21 PM

Author Topic: Build a CNC mini Mill  (Read 4097 times)

0 Members and 1 Guest are viewing this topic.

Build a CNC mini Mill
« on: March 01, 2011, 07:30:28 PM »
Ok, the details are mostly worked out and the official announcement is on the HomeShop Machinist web site, see http://bbs.homeshopmachinist.net/showthread.php?t=46691

The short version is that we have made a group purchase deal with Little Machine Shop for 10 of their new high torque mini mills, and with CNCfusion for their ballscrew conversion kits. We also have all the electronics, stepper motors, smoothstepper, gecko540 etc and the Mach3 software.

We have limited it to 10 students, and at least 3 are already signed up. You will get the entire kit of parts, registration at the CNC workshop for all 4 days and all events, for less than the street price of the parts. You will only pay for shipping from the workshop to your home- free if you drive to the workshop and take it home with you.

We will have a formal class each day to work on the machine, then you will have time to attend any of the seminars, or visit the exhibits. By the last day your machine will be running, tested, and ready to make parts.

Brian Barker will lead the day on installing and running Mach, maybe you can get an autograph!.

For all the details see the HomeShop web site. There is reasonable hosing, even dorm rooms.
Its in Ann Arbor Michigan, last week in June.