I am new to CNC and learning a lot. I have a Taig mill with steppers on X and Y. I will add the Z stepper as soon as I get comfortable moving the table around.
I am running Mach3, version R1.84.001, Bob Campbell's Mach3 Enclosure, and Bob's SoundlogicM3.xml file. I don't have limit or home switches on the mill yet.
No problem running several simple G Code files, but I found that my machine zeros were changing. I finally figured out that if I move the table to some location away from X and Y zero, close Mach3, and restart Mach3, machine zero is then at the last spindle location before shutting Mach down. From listening to Art's Homing and Limits video several times, I thought that machine zero could only be changed by referencing the machine to the home switches and of course, I don't have home switches yet. Any suggestions. I may have something set wrong or be doing something wrong. I am not sure I've given enough information, so please let me know if some other detail is needed.
Thanks,
Chuck