Hello Guest it is January 17, 2022, 04:22:49 AM

Author Topic: Interface Tutorial  (Read 4784 times)

0 Members and 1 Guest are viewing this topic.

Re: Interface Tutorial
« Reply #10 on: February 15, 2011, 03:12:28 PM »
Ok, forget about Safe Z for now, it's used to clear the part, clamps or other parts of the set up while rapiding and/or going to the tool change pos (among others).

I believe you are correct about the inhibit.

You set the Persistand where Hood mentioned, Ports n pins, spindle setup.

Your # of passes in the wizard is determined by the total depth and the depth per pass selected.

Be back shortly,

Offline kolias

  •  1,011 1,011
    • View Profile
Re: Interface Tutorial
« Reply #11 on: February 15, 2011, 06:32:24 PM »
Thanks Russ, finally I’m there LOL

ok so I got the Z-Inhibit what it does and how we set it on and besides the main Mach screen the Z-Inhibit is also on the Ports & Pins menu / Mill Options and there it’s also the Persistant Option

In other words the Z-Inhibit is a safety option to prevent the Z travelling lower than a certain limit

Thanks for your time