Hello Guest it is March 28, 2024, 12:12:04 PM

Author Topic: PoPendant pdf help  (Read 2651 times)

0 Members and 1 Guest are viewing this topic.

PoPendant pdf help
« on: December 28, 2010, 01:44:49 PM »
In the popendant pdf pin 5 says connect to N.C.

What pin is that please.

Phil

Sent from my HTC Desire using Tapatalk
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline borisz

*
  •  220 220
    • View Profile
    • www.poscope.com
Re: PoPendant pdf help
« Reply #1 on: December 28, 2010, 03:14:59 PM »
Hi!

Writing user manuals is very time consumpting work. To be honest nobody like these work, but we are writing them to help customers.
So, please READ USER MANUAL. It is not very hard and we put a lot of efforts in them.
In the same table at the bottom line, you have explanation for these: "NC.= not connected"
Simple?

regards

Boris
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope
Re: PoPendant pdf help
« Reply #2 on: December 28, 2010, 04:33:10 PM »
Boris thanks for your answer.

Lamps normally have two wires connected, hence my question.

Better be safe than sorry.

Phil

Sent from my HTC Desire using Tapatalk
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable