Hello Guest it is April 23, 2024, 05:39:28 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: How to input the setover for the routing tool  (Read 2915 times)

0 Members and 1 Guest are viewing this topic.

Offline technicrdd

*
  • 25 25
    • View Profile
How to input the setover for the routing tool
« on: November 07, 2006, 02:26:41 PM »
Am having trouble getting the setover of a .250 ball end cutter setover (0.125").  I want the setover to be around 0.050". Can not tell where or the settings or offsets are to be used.  Can I do this in Mach2 or must I go back to the BobCad program to do the reset to a smaller setover, Help anyone!
« Last Edit: November 07, 2006, 04:32:43 PM by technicrdd »
Logged

Offline chad

*
  • *
  • 361 361
  • When the going gets weird, the weird turn pro.
    • View Profile
Re: How to input the setover for the routing tool
« Reply #1 on: November 07, 2006, 04:37:20 PM »
That is a setting some ware in BobCam. I would also suggest that you update to the latest version of mach 3.  Mach 2 isn't supported any more and most people are using 3.

Chad
Logged

Offline Brian Barker

*
  • *
  • 3,859 3,859
    • View Profile
Re: How to input the setover for the routing tool
« Reply #2 on: November 08, 2006, 06:59:21 AM »
You will need to set the stepover in BobCad... I can't help you do that as i don't run it :(
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Pages: 1   Go Up
« previous next »