Hello Guest it is November 14, 2019, 01:50:44 AM

Author Topic: RC flight stand & Bean bag boards  (Read 2180 times)

0 Members and 1 Guest are viewing this topic.

Offline Rademacher

*
  •  25 25
  • Give it a try! How hard can it be?
    • View Profile
RC flight stand & Bean bag boards
« on: December 02, 2010, 09:19:08 PM »
The flightstand was cut from Baltic birch plywood. The entire assembly folds up for easy transport.

The Beanbag boards were cut A/C grade pine plywood.

Online Tweakie.CNC

*
  • *
  •  7,987 7,987
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: RC flight stand & Bean bag boards
« Reply #1 on: December 03, 2010, 07:47:00 AM »
Nice work.

I use a similar, but not as good as yours, commercially made stand for locations where permanent flight tables are not available.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.