Machsupport Forum

General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: Rademacher on December 02, 2010, 09:19:08 PM

Title: RC flight stand & Bean bag boards
Post by: Rademacher on December 02, 2010, 09:19:08 PM

The flightstand was cut from Baltic birch plywood. The entire assembly folds up for easy transport.

The Beanbag boards were cut A/C grade pine plywood.

Title: Re: RC flight stand & Bean bag boards
Post by: Tweakie.CNC on December 03, 2010, 07:47:00 AM

Nice work.

I use a similar, but not as good as yours, commercially made stand for locations where permanent flight tables are not available.

Tweakie.