Hello Guest it is January 27, 2021, 05:18:34 AM

Author Topic: press reset, emergency mode active  (Read 20043 times)

0 Members and 1 Guest are viewing this topic.

Offline GT390

*
  •  16 16
    • View Profile
press reset, emergency mode active
« on: November 16, 2010, 07:27:56 PM »
Hi, I have downloaded the demo, and have got the reset button flashing, and the words "press reset, emergency mode active"
but it wont reset, total noob, what doI need to do ?

I am running vista

Thanks in advance !

Offline ger21

*
  • *
  •  6,287 6,287
    • View Profile
    • The CNC Woodworker
Re: press reset, emergency mode active
« Reply #1 on: November 16, 2010, 09:06:14 PM »
In ports and pins, input pins, toggle the active low setting of the E-stop pin.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html