Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: GT390 on November 16, 2010, 07:27:56 PM

Title: press reset, emergency mode active
Post by: GT390 on November 16, 2010, 07:27:56 PM

Hi, I have downloaded the demo, and have got the reset button flashing, and the words "press reset, emergency mode active"
but it wont reset, total noob, what doI need to do ?

I am running vista

Thanks in advance !

Title: Re: press reset, emergency mode active
Post by: ger21 on November 16, 2010, 09:06:14 PM

In ports and pins, input pins, toggle the active low setting of the E-stop pin.