Hello Guest it is March 28, 2024, 05:10:45 AM

Author Topic: Fillet Radius is too big  (Read 5443 times)

0 Members and 1 Guest are viewing this topic.

Offline MHJ

*
  •  18 18
    • View Profile
Fillet Radius is too big
« on: October 08, 2010, 06:29:37 AM »
Hello.

whenever I load up the Turn Wizards I get the scrolling message "Fillet Radius is too big" .... and this message appears in every turn wizard!
Closing and restarting mach3 and/ or the computer makes no difference.
All the wizards have zero in every box....the message is still there. How do I get rid of the message?
XML attached,
Regards
John.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Fillet Radius is too big
« Reply #1 on: October 08, 2010, 07:10:43 AM »
Just tried with your xml and its fine. What are you putting in as the fillet radius in the wizards?
Hood

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Fillet Radius is too big
« Reply #2 on: October 08, 2010, 07:12:26 AM »
Actually just reread and you say you have zero in each box, you need to enter numbers for the wizards to give you code.
Hood

Offline MHJ

*
  •  18 18
    • View Profile
Re: Fillet Radius is too big
« Reply #3 on: October 08, 2010, 08:42:49 AM »
Thanks, Hood.
I now know what I've done wrong, entered +ve values in the X and Z endpoints instead of -ve. Silly me. Plenty to learn eh?
Regards,
John.
PS. how are you on PWM signals from Mach3 to control the lathe spindle via a Homann Digispeed and an Emerson VFD?

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Fillet Radius is too big
« Reply #4 on: October 08, 2010, 08:52:59 AM »
Not a clue I am afraid, only ever had servo spindles.
Hood